当前位置: Home > Product > Cleaning machine
Cleaning machine

DGQ-A model sucker rod cleaning machine

DGQ-A model sucker rod cleaning machine

Detailed

DGQ-A model electric heat cleaning machine it is designed for cleaning the used sucker rod, it has features of saving labor, high efficiency, and good effect.

Parameters

1、application:¢16-¢48

2、working speed:8m/min

3、total power:110KW

4、size:19000 X 500X 750(mm)

Working principle

The machine is consisted of transmission unit, mid-frequency heating unit, water cleaning unit, unloading unit, and dust discharging unit.  

1、Transmission unit

The transmission rollers take the sucker rod through the heating inductor into the cleaning box for cleaning.

2、mid-frequency heating unit

It is consisted of mid-frequency power, inductor and cool water system, it is used to heat the sucker rod and make the power cool. The output power can be regulated according to technical requirement to make the cleaned rod keep clean and strength.

3、cleaning unit with water

Four motors with steel brushes floated fixed on the two sides of the machine frame to clean the sucker rod, the distance between the brushes and sucker rod surface can be regulated for different diameter rods. The water spaying makes better cleaning effect.

4、unloading unit

It is fixed on the back of the machine frame, it is used to unload the rod after cleaning, it is consisted of electric cylinder, connection rod, and kickoff hook, etc.

5、dust discharging unit

It is equipped above the inductor, it is consisted of cover, cannel and centrifugal blower which is used to collect the dust in cleaning considering of the  environmental protection.


分享到:
Hits:  UpdateTime:2015-12-11 10:34:27  【Printing】  【Close