当前位置: Home > Product > Rust remover
Rust remover

YWCXJ62/178 Outer rust mover

YWCXJ62/178 Outer rust mover

Detailed

Structure & working principle

This rust mover is used for removing the rust on the outside surface of the tubing. The turn over device put the tubing onto the transmission rollers, the rollers rotate and take the tubing into the rust mover. The four sets of steel wire wheels brush the tubing surface at a high speed.

 

Technical parameters

1.    {C}Model YWCXJ62/178

2.    {C}Application¢60 -¢1782 3/8”-7”pipes

3.    {C}Application length8m-12m

4.    {C}Speed of the steel wire wheel1450r/min

5.    {C}Rust removing mode

The motor makes the steel wheels rotate at a high speed, and there are four sets of steel wheels, every set has three steel wire wheels, the wheel can center automatically

6.      {C}Pipes transporting: rollers rotate.

7.      {C}Pipes transporting speed: frequency control speed automatically.

8.      {C}Turn over mode: pneumatic

9.      {C}Operation modes: PLC+ industry computerbuttons, manual/auto

10.  {C}Power:

Motor of the outer rust mover: 3KW x 4 set

Motor of the transmission lin: 0.75KWx

11.  {C}Size

Length x width x height =1620mmx1500mmx1200mm

12.  {C}Air requirement: 0.6-0.8Mpa (provided by user)

 

分享到:
Hits:  UpdateTime:2018-07-25 07:07:52  【Printing】  【Close